Staintune Australia
Pipes of Perfection

FULL replacement system available for BMW R1200RT Model

The new 1200 version of the BMW RT is just begging for a system, the
standard system being cumbersome, heavy and quiet, not to mention very
unattractive.  Staintune has developed a full system for the RT model
with a choice of slip-on replacement muffler interchangeable with the standard
header collector set with the use of a supplied adaptor or the recommended
full system as shown above.

Performance:  The full system design has provided a 5Hp
gain while static on the dyno. In standard trim there is a number of holes
in the torque curve which the Staintune system has eliminated, increasing
torque at the points required.  During road testing significant
improvement to the throttle response was noted making the bike much more
responsive right from the bottom and through mid-range with throttle roll-on a dream ~ no hesitation anymore.

Weight Savings:  There is an overall 3Kg weight saving to
be gained by fitting the full system. 

Finish:  The Full System for the R1200 RT model consists
of the header pipes, collector junction and oval designed muffler with
the Staintune-designed removable restrictor.  The system is delivered
in Staintune's famous mirror finish, and looks as good as it performs and
sounds.

Should you wish to only purchase the muffler, it comes with an adaptor
sleeve to connect to the standard header collector system.

Noise Emissions:

Standard:	88dba  @  3750rpm
Restrictors In:	86dba  @  3750rpm
Restrictors Out:	90dba  @  3750rpm

The R1200ST & RT Models with the full system or muffler only are
both totally ADR compliant.

 

Part Number: BM MS R120 RT
Part Number: BM HC R120 RST