| ...How does STAINTUNE compare
to the rest?
STAINTUNE exhausts are designed to be the finest system
available. You should not limit any comparison to just "how much horsepower
do I get"? Do you want to buy a new system every few years because the
one you bought, that made the most horsepower, fell apart? It hardly seems
that any others can be considered comparable or even a value at that point.
We have countless customers that find buying the best system once sure
beats the pants off trying and buying something cheaper twice, or even
three times in some cases.
| "...does not require modifications
to the bike in any manner, such as jetting, chipping or any other change..." |
Mechanically, visually and audibly they are an example
of how far a manufacturer can go, without cutting any corners to attain
a level of fit and finish that every other manufacturer wishes to achieve.
The meticulous hand welds, hand polishing, the use of stainless steel and
a packing material that never blows out or needs servicing, gives them
a huge advantage over all others. There was a most interesting quote from
one of the largest exhaust manufacturers at a recent trade show, "I wish
we could do that to our systems, but it's just too time consuming". It's
not what they could be doing that is of interest, it's what they don't
do that makes STAINTUNE an instantly superior product. The effort alone
it takes to polish raw stainless steel to a jewellers grade finish, in
no less than a seven stage process, is testament to the lengths STAINTUNE
goes to set itself apart from the rest. The materials used have the potential
to outlast the expected life of the vehicle.
Part of the pleasure of owning a premium exhaust system
is low maintenance. STAINTUNE exhaust systems are packed with a spun
stainless steel wool which never disintegrates or blows out, and require
no internal maintenance. This means you can spend more time riding.
You also need to take into consideration that every exhaust
that STAINTUNE makes does not require modifications to the bike in any
manner, such as jetting, chipping or any other change at all. Simply take
it out of the box, bolt it on and go! No other labor is needed to make
it work. We don't know of any other manufacturer who can make that claim.

|