Staintune Australia
Pipes of Perfection

High performance, perfectly fitting exhaust systems - with jaw-dropping quality, sleek lines and a note you could dance to.
Home Exhausts
Mufflers & Pipes Aprilia BMW Cagiva Can-Am Ducati Honda Hyosung Kawasaki KTM Moto Guzzi Suzuki Triumph Yamaha Fitting Instructions
Dealers FAQ Fuel Injection Other Pages

Turn Firewall Off!

Merchandise








 



 

STAINTUNE FUEL INJECTION CONTROL UNIT INSTALLATION

DUCATI  620i / 750 / 800 / 900 / 1000 SS Models 
SFi  Unit  1025

Display guide:

  • Green: Idle - Position 3 
  • Yellow: Acceleration - Position 3 
  • Red: Cruising - Position 2 
  • RPM: No led indicator – Position 6


Injector Wires: Connect each of the SFi Unit  wires which are Blue and Grey to any one of the of the injector wires which can be either of the following colours;

White / Violet  or  Orange / Blue

Connect the power wire RED to the tail light wire, this will ensure the unit is activated only when the ignition is on and therefore won’t run the battery down.

Connect the earth wire BLACK to a clean earth spot.

Important: 

If you have had an FIM download already installed into your ECU, the SFi will not provide you with satisfactory results.  The SFi units have been designed to work from the standard ECU configuration.

 It won’t be uncommon to have the red fuel pot higher then the base settings with a our exhaust system fitted.
 


This information available in MS Word format:
Ducati SS Models

See also: 
General SFI Fitting Instructions
Prices and Applications

Staintune Fuel Injection
Staintune Fuel Injection